Physics HQ

Fluids & Thermo (Diagram D)

Teachers use g = 9.8 or round to g = 10. Pick yours and the answers update.

Diagram D gives you: ρ = 540 kg/m³, c = 0.4 J/kg·K, α = 7.5×10⁻⁶ K⁻¹, β = 9×10⁻⁶ K⁻¹. Pipe E has area A, pipe G has area 2A, pipe F has area 3A. E and G are level. F is higher up.

Don't panic about α and β! They are about how things expand when heated. No question here uses them. Remember: you can ignore numbers you don't need.

Problem 1
If the fluid is not flowing, the pressure in pipe G is greater than, less than, or equal to the pressure in pipe F?

Idea you need: Deeper means more pressure

  1. Code words: "not flowing" means only depth matters. Ignore the pipe areas.

  2. Look at the picture: G is lower down than F. So G has more fluid stacked above it.

  3. Greater than. Pressure in G > pressure in F.
Problem 2
If the fluid is not flowing, the pressure in pipe G is greater than, less than, or equal to the pressure in pipe E?

Idea you need: Deeper means more pressure

  1. Check height. G and E are side by side, at the same level. The different areas are a distraction.

  2. Equal to. Same height, same pressure.
Problem 3
If the mass of all the fluid in all the pipes combined is equal to 5 Mg, how much space does the entire pipe system take up?

Ideas you need: Units, Density

  1. Fix the name tag. Mg means megagram. 1 Mg = 1,000 kg. (It's not milligrams. That's a small m!)

    5 Mg = 5,000 kg
  2. Translate the question. "How much space" means volume, V = ?

  3. Rule. ρ = m ÷ V. Rearranged:

    V = m ÷ ρ = 5,000 ÷ 540
  4. V ≈ 9.26 m³
Problem 4
If the volume in pipe G is 7 cm³, what then is the mass of fluid within it?

Ideas you need: Units, Density

  1. Fix the name tag. Density uses m³, so change cm³ to m³. 1 cm³ = 0.000001 m³.

    7 cm³ = 7 × 0.000001 = 0.000007 m³
  2. Rule. m = ρ × V.

    m = 540 × 0.000007
  3. m = 0.00378 kgThat's the same as 3.78 grams. A tiny pipe holds a tiny mass, so it makes sense.
Problem 5
If the volume of pipe E is 0.5 m³, how much heat would it take to change the fluid's temperature in pipe E by 1 K?

Ideas you need: Density, Heat

  1. Spot the rule. "Heat" and "change temperature" mean Q = m c ΔT.

  2. What's missing? We know c = 0.4 and ΔT = 1 K. No mass! But density can get it for us.

    m = ρ × V = 540 × 0.5 = 270 kg
  3. Plug in.

    Q = 270 × 0.4 × 1
  4. Q = 108 J
Problem 6
If the fluid in the pipes were to pour into a container, and then a walrus were to climb into the container submerging half its volume, what is the density of the walrus?

Idea you need: Why things float

  1. Code word. Half is under and half is above, so the walrus is floating.

  2. Rule. Part underwater = object density ÷ fluid density.

    0.5 = ρwalrus ÷ 540
  3. Get ρ alone. Multiply both sides by 540.

    ρwalrus = 0.5 × 540
  4. 270 kg/m³
Problem 7
Mixed materials automatically organize by what quantity?

Idea you need: Density

  1. Think of oil and water in a jar. What makes oil go on top?

  2. Density. Least dense floats to the top, most dense sinks to the bottom.